## 產品概述

這款是**智能馬桶 / 智能馬桶蓋專用進水前置 PP 過濾器**，分為 2 個品類：獨立替換 PP 熔噴濾芯 + 一體式帶殼過濾總成，安裝在智能馬桶進水口，屬于衛浴前置保護配件，攔截自來水管網的泥沙、鐵銹、膠體、顆粒雜質，**保護智能馬桶噴嘴、電磁閥，防止堵塞、出水變小、設備故障**。

## 核心參數

- 濾芯材質：食品級 PP 聚丙烯熔噴棉，梯度深層過濾（外松內密）
- 過濾精度：5μm（主流，可定制 1μm/10μm）
- 外殼材質：PP 工程塑料，耐水壓、抗老化
- 工作壓力：0.1~0.4MPa
- 適用水溫：5~45℃
- 標準接口：4 分螺紋（1/2"，馬桶進水通用接口，可定制）
- 建議更換周期：6~12 個月（水質差地區建議 6 個月）
- 包裝：獨立 PE 袋封裝，成對 / 單支包裝，支持 OEM 貼牌、印刷 LOGO

## 產品賣點

1. **保護智能馬桶**：過濾泥沙鐵銹，避免雜質堵住清洗噴嘴，延長智能馬桶、馬桶蓋使用壽命，減少售后維修
2. **拆裝簡易**：一體式總成，直接擰在角閥與馬桶軟管之間；換芯款直接旋開殼體更換濾芯，不用工具
3. **食品級材質**：全新 PP 原料，無異味，不含有害物質，用于臀洗婦洗水路更安心
4. **通用適配**：適配絕大多數品牌智能馬桶、智能馬桶蓋（九牧、箭牌、海爾、小沐等通用款）
5. **體積小巧**，不占空間，家裝、舊房改造都方便安裝

## 應用場景

? 智能馬桶、智能坐便蓋、凈身器進水前置過濾；也可用于小型衛浴設備、小型凈水設備前置粗濾 

深圳市陶氏水處理設備技術開發有限公司是專業的凈水器配件供應
商，創建于2000年，是一家集設計、創新、研發、生產和服務于一體的現
代化企業，專業生產凈水機專用活性碳濾芯、折疊濾芯、阻垢碳棒濾芯、
PP棉濾芯、PE水管、壓力桶、濾瓶、膜殼等凈水機零部件，并獲得涉水產
品衛生許可批件。
深圳陶氏自成立伊始，一直秉承“創新和發展共存，專業和精益求
精”的方針，做“品牌背后的品牌”致力于水處理技術創新和配件研發生
產。同時借鑒國外優質同類型產品的技術進行綜合改善，在原有技術的基
礎上不斷拓展和創新。經過十余年的發展與沉淀，深圳陶氏現已擁有3萬多
平米的現代化專業生產廠房，在水管、濾芯和壓力桶研發生產技術上取得
的成果尤為顯著，凈水器專用PE水管日產量高達75萬米，熔噴PP濾芯日產
量也已突破15萬支，11G壓力桶日產量高居2250臺，這是一個新的高度與
突破，陶氏將繼續保持并持續進步。
在確保凈水配件產量同時，企業也對產品質量嚴格把控，針對不同的
凈水機部件產品有不同的檢測方案，例如：熔噴PP棉濾芯每支都會經過專
業的測試儀器，確保孔徑符合標準；凈水機專用PE水管采用10萬次水錘測
試，力求做到讓每一款產品從研發到生產過程都有明確的質量保證系統。                                                                                                                                           
Shenzhen Taoshi Co., Ltd. is a professional water purifier accessories supplier. It was 
founded in 2000 and is a Modern enterprise which integrated design, innovation, 
research and development, production and service. 
It has been specializing in manufacturing folding filter element，PE tubing(PE pipe), RO 
water storage tank, melt-blow PP filter, filter/RO housing and all other kinds of water filter 
accessories. It has won many qualifications and certifications.
Since it was established, Shenzhen Taoshi has been adhering to the policy of 
"coexistence of innovation and development, professionalism and excellence", and 
"brand behind the brand". It committed to water treatment technology innovation, water 
treatment accessories R & D and production. In the meanwhile, it has made the 
improvement based on the technology of foreign high-quality products, and continue to 
expand products series and innovate the original technology. With the development and 
sedimentary of more than ten years, Shenzhen Taoshi now has more than 30,000 
square meters of modern professional production plants. The technology is particularly 
remarkable in manufacturing water PE tubes, filter cartridges and water storage tanks . 
The daily output of PE water PE tubes reaches 750,000 meters,PP filter cartridges 
exceed 150,000pcs and 11G water storage tanks is 2250 units.It has achieved a new 
height and breakthrough, and will continue to maintain and make progress.
While ensuring the output of water purification accessories, the company also strictly 
controls the product quality and has different testing schemes for different water purifier 
components. For example: each melt-blown PP filter will be tested by professional 
testing equipment to confirm if the pore size meets the standard; PE water tube must 
pass 100,000 water hammer tests , etc.. It strives to make every product have a clear 
quality guarantee system from R&D to production.